It is important to have an adequate number of vents in the glasshouse to increase air flow and avoid excessive temperatures.   

Redpath glasshouse shelf brackets are made of aluminium to give maintenance free structure which won't rust or rot in humid greenhouse conditions.

THREE TIER SHELF
900mm wide x 950mm tall x 495mm deep - three tier free standing shelf unit.  Grid mesh top and steel tube frame construction - green colour.

FOUR TIER "STEPPED" SHELF
685mm wide x 1050mm tall x 2 @ 495mm x 2 @ 235mm deep - four tier free standing shelf unit.  Grid mesh top and steel tube construction - green colour.

FOUR TIER SHELF
900mm wide x 1385mm tall x 495mm deep - four tier free standing shelf unit.  Grid mesh top and steel tube construction - green colour.

SHELF BRACKETS
Aluminium shelf brackets are supplied in pairs complete with cropped headed bolts for fixing in aluminium greenhouses. The idea of the shelf brackets is so that any material, e.g. timber, aluminium, steel, etc, can sit safely on top of the bracket.

DOOR LOCKS
Aluminium bracket attached to the framework which facilitates the use of a padlock to key lock the door. This system is available for both single or double door greenhouses (padlock not included)

DOOR WHEELS

Plastic door wheel with self lubricating ball race in two sizes: 28mm and 32mm (most commonly 28mm is used). These wheels afford finger tip control for doors. Please call Redpath if spares or replacement wheels are required.

LINING HOOKS

These are used to attach lining (e.g. bubble plastic, netting etc). The plug is pushed through the lining material and then twisted and locked into position in the groove of the inside face of the glazing bar.

WIRE CLIPS

This clip is in self colour stainless steel and is butterfly shaped. It attaches to the side of the glass ensuring that the glass is tight against the glazing bar. Call Redpath if spares or extras are required.

OVERLAP CLIPS

This clip is aluminium and has the flexibility of allowing for glass tolerance as it is pre-formed at the top and is formed at the bottom by hand during greenhouse glazing. Call Redpath if spares or extras are required.

SPRING CLIPS

Self colour stainless steel will not rust and in addition to holding the glass firmly against the glazing bar, it also acts as an overlap support. Call Redpath if spares or extras are required.

CRESTING

Ridge cresting on your Belmont model or High Eave model will add that extra bit of aesthetic appeal to your glasshouse.  The ridge Cresting also aids in the deterrent of birds landing on the ridge of the glasshouse so our customers tell us!  The cresting is supplied in a silver alloy finish as standard - however, may be colour coded to your choice of frame colour (see colour options)

5 BLADE LOUVRE KIT

The optional five blade louvre kit may be added to any model of Redpath Glasshouse, including The Belmont, The High Eve & The Kensington Lean To glasshouse designs.

The louvre will provide additional ventilation to the glasshouse & may be positioned in the sidewall or the end wall of the glasshouse. You may fit as many louvre kit windows as you desire!

CROP SUPPORT CLIP

Attach to the aluminium rafter and then attach tomato strings etc to it.

LOCKSTRIP HOLDING SCREWS

Self drilling screws for screwing Lockstrip to your greenhouse frame. Supplied in “Timber type” & “Steel type” threads.
Bags of 100 items.

SHADING & INSULATION

NETTING

Netting provides a good shade system for plants that are over exposed to the sun, e.g. if one side of the roof is facing south, scorching of leaves can take place. The netting helps to dissipate the sun's rays and prevent burning. Varios grades of internal shade netting can be used, along with the Redpath lining hook to hold the shadecloth in place. (see above).