Hot dipped galvanized and powder coated poles
are anchored in deep foundations and feature anti-lift retainers.
Foundation design is critical for the reliable
long term performance of the building. Foundations are required to resist
various loads including those from the crop, wind & snow load. Redpath
foundations & footings are anchored deep (1.2m - 4') into the ground
& have a diameter of up to 400mm (16") dependant on surrounding ground
conditions. Redpath can usually recommend alternative footing designs for
site specific conditions such as sand or loose peat which usually require
a differing design form standard. All footings include anti-pullout
rods to resist uplift loads & for positive securing of the concrete
to the post. Another standard feature of our footing design is the
inclusion of a heavy duty anti-corrosion treatment for protection from
ground contact.
All posts & footings feature a “hot dipped”
galvanized marine type finish which is then additionally coated with a
water resistant chlorinated rubber protective paint. Both of these
coatings give a superior guarantee of corrosion resistance & long trouble
free life even in the harshest conditions of spray use & saltwater
exposure.
